• 3

address:Wu Xin Industrial Park, Jieshi Town, Banan District, Chongqing

National Service Hotline:

023-66429246 

Chongqing Xingi Building Materil Machinery Manufacture Co.Ltd.   Copyright     Yu ICP prepare No. 18011446 -1 Powered By: www.300.cn

电话:

023-67198520

地址:重庆市两江新区水土高新技术产业园云汉大道5号附283号

重庆德飞工程质量检测有限责任公司 版权所有 渝ICP备084e927704893号-0 网站建设:中企动力 重庆

>
>
>
Matters needing attention of the equipment of automatic permeable brick machine just put into production

Matters needing attention of the equipment of automatic permeable brick machine just put into production

Page view
[Abstract]:
Whenfullyautomaticperviousbrickmachineequipmentjustreadytoputintoproduction,whatproblemshouldbepaidattentiontoasbrickfactory?   Everythinghasarunning-inperiod,equipmentisalsothesame,theoperationisnotv
  When fully automatic pervious brick machine equipment just ready to put into production, what problem should be paid attention to as brick factory?
 
  Everything has a running-in period, equipment is also the same, the operation is not very skilled at the beginning, how to pass this running-in period to make the equipment run better?
 
  The most important thing for mechanical equipment is to understand the load required for the whole operation. Generally, the overall load should not exceed 80% of the total load at the initial stage of using the fully automatic permeable brick machine equipment, reasonably adjust the workload of the fully automatic permeable brick machine equipment, and prevent equipment failure, such as vibration problem, heating phenomenon, stuck material, etc. You can adopt the cyclic progressive method, just start to use the fully automatic water permeable brick machine equipment, you can first let the Settings idling several times, slowly on the right track, each responsible technician is very skilled in their own operations, and then slowly add materials production, do not be in a hurry to produce. The first week can work 6 hours, the second week 8 to 10 hours, and the later period can produce 12 hours.
 
  After more than ten days of production, the equipment of the full automatic permeable brick machine should be checked to check whether the vibration box of the machine is normal, whether the vibration frequency is normal, whether the mold box is out of place, and whether the products produced conform to the standard. In this way, it can be detected that which part is installed unreasonable or has error. Generally, the hydraulic oil should be refilled after the hydraulic oil is used in the run-in period. When cleaning, the hydraulic oil cylinder should be cleaned. The hydraulic oil cylinder of the equipment of the fully automatic permeable brick machine should pay great attention to the cleaning problem. Generally, the equipment can be put into production normally and quickly after passing the grinding period.